BHP+15 hp (6%)
Standard
250 hp
Tuned
265 hp
Torque+20 Nm (6%)
Standard
320 Nm
Tuned
340 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowAudi A3 3.2 V6 250hp ECU Remapping
Considering an ECU remap for your Audi A3 3.2 V6 250hp? A Stage 1 remap can take this 8P - 2003 - 2008 petrol engine from 250 BHP to 265 BHP and from 320 Nm to 340 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi A3 can achieve.
How this engine compares
- 64thof 71 Audi A3 engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi A3 3.2 V6 250hp is a 3.2L naturally aspirated petrol engine producing 250 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 265 BHP and 340 Nm — a gain of around 15 BHP (6%) and 20 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other A3 8P - 2003 - 2008 Engines
| Engine | BHP | Gain |
|---|