BHP+20 hp (13%)
Standard
150 hp
Tuned
170 hp
Torque+35 Nm (14%)
Standard
250 Nm
Tuned
285 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumAudi Q5 1.4 TFSI 150hp ECU Remapping
Considering an ECU remap for your Audi Q5 1.4 TFSI 150hp? A Stage 1 remap can take this 8R - 2012 - 2016 petrol engine from 150 BHP to 170 BHP and from 250 Nm to 285 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q5 can achieve.
How this engine compares
- 33rdof 35 Audi Q5 engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 20%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Audi Q5 1.4 TFSI 150hp is a 1.4L turbocharged petrol engine producing 150 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 170 BHP and 285 Nm — a gain of around 20 BHP (13%) and 35 Nm (14%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Q5 8R - 2012 - 2016 Engines
| Engine | BHP |
|---|