BMW 4 Series 430i 252hp Remap

Name: BMW 4 Series 430i 252hp ECU Remap
Brand: BMW

Expected gains of +35 BHP and +100 Nm torque

Get Your Free Quote ↓

BHP+35 hp (14%)

Standard

252 hp

Tuned

287 hp

Torque+100 Nm (29%)

Standard

350 Nm

Tuned

450 Nm

Suitability

Moderate (5.5/10)

Gains Profile

Torque-focused

Headroom

High

BMW 4 Series 430i 252hp ECU Remapping

Considering an ECU remap for your BMW 4 Series 430i 252hp? A Stage 1 remap can take this F36 - May/2016 - 2021 petrol engine from 252 BHP to 287 BHP and from 350 Nm to 450 Nm of torque (naturally aspirated). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW 4 Series can achieve.

How this engine compares

38thof 52 BMW 4 Series engines by power gain
54%of the 9,842 engines we hold gain data for see a smaller power increase
79%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The BMW 4 serie 430i 252hp is a 2.0L naturally aspirated petrol engine producing 252 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 287 BHP and 450 Nm — a gain of around 35 BHP (14%) and 100 Nm (29%).

This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other 4 Series F36 - May/2016 - 2021 Engines

Engine	BHP	Gain	Torque	Gain	Score
418i 136hp	136 → 170	+34	220 → 280	+60	Moderate (5.5/10)
418d 150hp	150 → 190	+40	320 → 400	+80	Excellent (8/10)
420i 184hp	184 → 250	+66	270 → 440	+170	Good (6.5/10)
420d 190hp	190 → 220	+30	400 → 440	+40	Good (6.5/10)
425d 224hp	224 → 270	+46	450 → 500	+50	Good (7/10)
430d 258hp	258 → 310	+52	560 → 650	+90	Good (7/10)
435i 306hp	306 → 370	+64	400 → 520	+120	Moderate (5.5/10)
435d 313hp	313 → 360	+47	630 → 700	+70	Good (6.5/10)
440i 326hp	326 → 380	+54	450 → 560	+110	Moderate (5.5/10)

Technical Specifications

Fuel Type: Petrol
Aspiration: Naturally Aspirated
Displacement: 2L
Capacity: 1998 CC
Type: Car
Engine Family: BMW 2.0L NA Petrol

ECU & Transmission

Likely ECU Low confidence: Bosch MEVD/MG1 family (varies)
Gearbox Medium confidence: Many variants use ZF 8-speed automatic (where fitted); manuals also exist. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your BMW 4 Series. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeBMW

Model4 Series

GenerationF36 - May/2016 - 2021

Engine430i 252hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.