BHP+13 hp (4%)
Standard
347 hp
Tuned
360 hp
Torque+20 Nm (4%)
Standard
480 Nm
Tuned
500 Nm
Suitability
Limited (3/10)Gains Profile
Limited headroomHeadroom
LowBMW X5 4.6i 347hp ECU Remapping
Considering an ECU remap for your BMW X5 4.6i 347hp? A Stage 1 remap can take this E53 - 2000 - 2007 petrol engine from 347 BHP to 360 BHP and from 480 Nm to 500 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW X5 can achieve.
How this engine compares
- 45thof 46 BMW X5 engines by power gain
- 8%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The BMW X5 4.6i 347hp is a 4.6L naturally aspirated petrol engine producing 347 BHP and 480 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 360 BHP and 500 Nm — a gain of around 13 BHP (4%) and 20 Nm (4%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other X5 E53 - 2000 - 2007 Engines
| Engine |
|---|