BMW X6 5.0i ActiveHybrid 486hp Remap

Name: BMW X6 5.0i ActiveHybrid 486hp ECU Remap
Brand: BMW

Expected gains of +44 BHP and +80 Nm torque

Get Your Free Quote ↓

BHP+44 hp (9%)

Standard

486 hp

Tuned

530 hp

Torque+80 Nm (10%)

Standard

780 Nm

Tuned

860 Nm

Suitability

Limited (3.5/10)

Gains Profile

Balanced

Headroom

Low

BMW X6 5.0i ActiveHybrid 486hp ECU Remapping

Considering an ECU remap for your BMW X6 5.0i ActiveHybrid 486hp? A Stage 1 remap can take this E71 - 2008 - 2014 petrol engine from 486 BHP to 530 BHP and from 780 Nm to 860 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW X6 can achieve.

How this engine compares

23rdof 29 BMW X6 engines by power gain
70%of the 9,842 engines we hold gain data for see a smaller power increase
64%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The BMW X6 5.0i ActiveHybrid 486hp is a 4.4L naturally aspirated petrol engine producing 486 BHP and 780 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 530 BHP and 860 Nm — a gain of around 44 BHP (9%) and 80 Nm (10%).

This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other X6 E71 - 2008 - 2014 Engines

Engine	BHP	Gain	Torque	Gain	Score
3.0D 211hp	211 → 280	+69	520 → 600	+80	Good (7.5/10)
3.0D 235hp	235 → 300	+65	520 → 620	+100	Good (7.5/10)
3.0D 245hp	245 → 300	+55	520 → 620	+100	Good (7.5/10)
3.5D 286hp	286 → 340	+54	580 → 680	+100	Good (6.5/10)
4.0D 306hp	306 → 350	+44	600 → 680	+80	Good (6/10)
3.5i 306hp	306 → 370	+64	400 → 520	+120	Moderate (5.5/10)
M 5.0D 381hp	381 → 420	+39	740 → 800	+60	Moderate (5.5/10)
5.0i 407hp	407 → 470	+63	600 → 700	+100	Moderate (5/10)
M 555hp	555 → 610	+55	680 → 800	+120	Moderate (4.5/10)

Technical Specifications

Fuel Type: Petrol
Aspiration: Naturally Aspirated
Displacement: 4.4L
Capacity: 4395 CC
Type: Car
Engine Family: BMW 4.4L NA Petrol

ECU & Transmission

Likely ECU Low confidence: Bosch MEVD/MG1 family (varies)
Gearbox Medium confidence: Many variants use ZF 5/6-speed automatics (where fitted); manuals also exist. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your BMW X6. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeBMW

ModelX6

GenerationE71 - 2008 - 2014

Engine5.0i ActiveHybrid 486hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.