BHP+6 hp (9%)
Standard
69 hp
Tuned
75 hp
Torque+15 Nm (16%)
Standard
95 Nm
Tuned
110 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumCitroën C1 1.0 e-VTI 69hp ECU Remapping
Considering an ECU remap for your Citroën C1 1.0 e-VTI 69hp? A Stage 1 remap can take this 2014 -> petrol engine from 69 BHP to 75 BHP and from 95 Nm to 110 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën C1 can achieve.
How this engine compares
- 4thof 4 Citroën C1 engines by power gain
- 0%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Citroën C1 1.0 e-VTI 69hp is a 1.0L naturally aspirated petrol engine producing 69 BHP and 95 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 75 BHP and 110 Nm — a gain of around 6 BHP (9%) and 15 Nm (16%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other C1 2014 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|