BHP+15 hp (10%)
Standard
150 hp
Tuned
165 hp
Torque+40 Nm (15%)
Standard
260 Nm
Tuned
300 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumDacia Dokker 1.3 TCe 150hp ECU Remapping
Considering an ECU remap for your Dacia Dokker 1.3 TCe 150hp? A Stage 1 remap can take this 2017 -> petrol engine from 150 BHP to 165 BHP and from 260 Nm to 300 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dacia Dokker can achieve.
How this engine compares
- 9thof 10 Dacia Dokker engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Dacia Dokker 1.3 TCe 150hp is a 1.3L turbocharged petrol engine producing 150 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 165 BHP and 300 Nm — a gain of around 15 BHP (10%) and 40 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other Dokker 2017 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|