BHP+10 hp (17%)
Standard
60 hp
Tuned
70 hp
Torque+12 Nm (12%)
Standard
102 Nm
Tuned
114 Nm
Suitability
Moderate (4.5/10)Gains Profile
Power-focusedHeadroom
MediumFiat Panda 1.2i 60hp ECU Remapping
Considering an ECU remap for your Fiat Panda 1.2i 60hp? A Stage 1 remap can take this All petrol engine from 60 BHP to 70 BHP and from 102 Nm to 114 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Panda can achieve.
How this engine compares
- 6thof 7 Fiat Panda engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 1%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Panda 1.2i 60hp is a 1.2L naturally aspirated petrol engine producing 60 BHP and 102 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 70 BHP and 114 Nm — a gain of around 10 BHP (17%) and 12 Nm (12%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.