BHP+35 hp (21%)
Standard
170 hp
Tuned
205 hp
Torque+75 Nm (21%)
Standard
350 Nm
Tuned
425 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighFiat Toro 2.0 Multijet 170hp ECU Remapping
Considering an ECU remap for your Fiat Toro 2.0 Multijet 170hp? A Stage 1 remap can take this 2016 -> diesel engine from 170 BHP to 205 BHP and from 350 Nm to 425 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Toro can achieve.
How this engine compares
- 1stof 2 Fiat Toro engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 63%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Fiat Toro 2.0 Multijet 170hp is a 2.0L turbocharged diesel engine producing 170 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 425 Nm — a gain of around 35 BHP (21%) and 75 Nm (21%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Technical Specifications
- Fuel Type
- Diesel
- Aspiration
- Turbocharged