BHP+30 hp (26%)
Standard
115 hp
Tuned
145 hp
Torque+60 Nm (21%)
Standard
280 Nm
Tuned
340 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighFord C-Max 1.8 TDCI 115hp ECU Remapping
Considering an ECU remap for your Ford C-Max 1.8 TDCI 115hp? A Stage 1 remap can take this 2007 - 2010 diesel engine from 115 BHP to 145 BHP and from 280 Nm to 340 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford C-Max can achieve.
How this engine compares
- 15thof 27 Ford C-Max engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford C-Max 1.8 TDCI 115hp is a 1.8L turbocharged diesel engine producing 115 BHP and 280 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 340 Nm — a gain of around 30 BHP (26%) and 60 Nm (21%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Siemens/Continental SID (common) or Bosch (varies).
Considerations: Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.