Ford F-150 3.0D V6 Powerstroke 253hp Remap

Name: Ford F-150 3.0D V6 Powerstroke 253hp ECU Remap
Brand: Ford

Expected gains of +37 BHP and +84 Nm torque

Get Your Free Quote ↓

BHP+37 hp (15%)

Standard

253 hp

Tuned

290 hp

Torque+84 Nm (14%)

Standard

596 Nm

Tuned

680 Nm

Suitability

Good (6.5/10)

Gains Profile

Balanced

Headroom

Medium

Ford F-150 3.0D V6 Powerstroke 253hp ECU Remapping

Considering an ECU remap for your Ford F-150 3.0D V6 Powerstroke 253hp? A Stage 1 remap can take this 2018 - 2020 diesel engine from 253 BHP to 290 BHP and from 596 Nm to 680 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford F-150 can achieve.

How this engine compares

5thof 19 Ford F-150 engines by power gain
60%of the 9,842 engines we hold gain data for see a smaller power increase
73%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Ford F-150 3.0D V6 Powerstroke 253hp is a 3.0L turbocharged diesel engine producing 253 BHP and 596 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 680 Nm — a gain of around 37 BHP (15%) and 84 Nm (14%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other F-150 2018 - 2020 Engines

Engine	BHP	Gain	Torque	Gain	Score
3.3 TI-VCT V6 290hp	290 → 310	+20	359 → 390	+31	Moderate (4/10)
2.7T Ecoboost V6 325hp	325 → 360	+35	508 → 550	+42	Moderate (5.5/10)
3.5T Ecoboost 375hp	375 → 400	+25	637 → 700	+63	Moderate (5.5/10)
5.0 V8 395hp	395 → 440	+45	542 → 565	+23	Limited (3.5/10)
3.5T Ecoboost Raptor 450hp	450 → 500	+50	691 → 830	+139	Good (6.5/10)

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Displacement: 3L
Capacity: 3000 CC
Type: Car
Engine Family: Ford 3.0L V6 Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Continental/Bosch diesel ECU (varies)
Gearbox Low confidence: Manual and automatic options vary; some models use Powershift (dual-clutch) automatics. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Ford F-150. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeFord

ModelF-150

Generation2018 - 2020

Engine3.0D V6 Powerstroke 253hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.