BHP+50 hp (15%)
Standard
325 hp
Tuned
375 hp
Torque+50 Nm (7%)
Standard
760 Nm
Tuned
810 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumFord F-350 6.0 V8 325hp ECU Remapping
Considering an ECU remap for your Ford F-350 6.0 V8 325hp? A Stage 1 remap can take this All diesel engine from 325 BHP to 375 BHP and from 760 Nm to 810 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford F-350 can achieve.
How this engine compares
- 1stof 6 Ford F-350 engines by power gain
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford F-350 6.0 V8 325hp is a 6.0L turbocharged diesel engine producing 325 BHP and 760 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 375 BHP and 810 Nm — a gain of around 50 BHP (15%) and 50 Nm (7%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other F-350 All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|