BHP+23 hp (6%)
Standard
362 hp
Tuned
385 hp
Torque+30 Nm (5%)
Standard
620 Nm
Tuned
650 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowFord F-550 6.8 V10 362hp ECU Remapping
Considering an ECU remap for your Ford F-550 6.8 V10 362hp? A Stage 1 remap can take this All petrol engine from 362 BHP to 385 BHP and from 620 Nm to 650 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford F-550 can achieve.
How this engine compares
- 4thof 5 Ford F-550 engines by power gain
- 26%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford F-550 6.8 V10 362hp is a 6.8L naturally aspirated petrol engine producing 362 BHP and 620 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 385 BHP and 650 Nm — a gain of around 23 BHP (6%) and 30 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other F-550 All Engines
| Engine |
|---|