BHP+20 hp (17%)
Standard
120 hp
Tuned
140 hp
Torque+50 Nm (19%)
Standard
270 Nm
Tuned
320 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumFord Focus 1.5 TDCi 120hp ECU Remapping
Considering an ECU remap for your Ford Focus 1.5 TDCi 120hp? A Stage 1 remap can take this 2014 - 2017 diesel engine from 120 BHP to 140 BHP and from 270 Nm to 320 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Focus can achieve.
How this engine compares
- 38thof 61 Ford Focus engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Focus 1.5 TDCi 120hp is a 1.5L turbocharged diesel engine producing 120 BHP and 270 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 320 Nm — a gain of around 20 BHP (17%) and 50 Nm (19%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Focus 2014 - 2017 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.5 TDCi 95hp | 95 → 135 |