BHP+30 hp (25%)
Standard
120 hp
Tuned
150 hp
Torque+40 Nm (13%)
Standard
300 Nm
Tuned
340 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumFord Puma 1.5 Ecoblue 120hp ECU Remapping
Considering an ECU remap for your Ford Puma 1.5 Ecoblue 120hp? A Stage 1 remap can take this 2019 -> diesel engine from 120 BHP to 150 BHP and from 300 Nm to 340 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Puma can achieve.
How this engine compares
- 1stof 5 Ford Puma engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Puma 1.5 Ecoblue 120hp is a 1.5L turbocharged diesel engine producing 120 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 150 BHP and 340 Nm — a gain of around 30 BHP (25%) and 40 Nm (13%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Puma 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.0 Ecoboost 125hp | 125 → 145 | +20 |