BHP+30 hp (15%)
Standard
200 hp
Tuned
230 hp
Torque+80 Nm (17%)
Standard
470 Nm
Tuned
550 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumFord Ranger 3.2 TDCi 200hp ECU Remapping
Considering an ECU remap for your Ford Ranger 3.2 TDCi 200hp? A Stage 1 remap can take this 2011 - 2015 diesel engine from 200 BHP to 230 BHP and from 470 Nm to 550 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Ranger can achieve.
How this engine compares
- 7thof 21 Ford Ranger engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Ranger 3.2 TDCi 200hp is a 3.2L turbocharged diesel engine producing 200 BHP and 470 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 550 Nm — a gain of around 30 BHP (15%) and 80 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Siemens/Continental SID (common) or Bosch (varies).
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Ranger 2011 - 2015 Engines
| Engine |
|---|