Jeep Commander 3.0 CRD 218hp Remap

Name: Jeep Commander 3.0 CRD 218hp ECU Remap
Brand: Jeep

Expected gains of +47 BHP and +90 Nm torque

Get Your Free Quote ↓

BHP+47 hp (22%)

Standard

218 hp

Tuned

265 hp

Torque+90 Nm (18%)

Standard

510 Nm

Tuned

600 Nm

Suitability

Good (6.5/10)

Gains Profile

Balanced

Headroom

Medium

Jeep Commander 3.0 CRD 218hp ECU Remapping

Considering an ECU remap for your Jeep Commander 3.0 CRD 218hp? A Stage 1 remap can take this 2006 - 2010 diesel engine from 218 BHP to 265 BHP and from 510 Nm to 600 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Commander can achieve.

How this engine compares

2ndof 9 Jeep Commander engines by power gain
74%of the 9,842 engines we hold gain data for see a smaller power increase
74%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Jeep Commander 3.0 CRD 218hp is a 3.0L turbocharged diesel engine producing 218 BHP and 510 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 265 BHP and 600 Nm — a gain of around 47 BHP (22%) and 90 Nm (18%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other Commander 2006 - 2010 Engines

Engine	BHP	Gain	Torque	Gain	Score
2.2 CRD 136hp	136 → 180	+44	320 → 380	+60	Good (7.5/10)
3.7 V8 210hp	210 → 230	+20	319 → 340	+21	Moderate (4/10)
3.0 CRD 211hp	211 → 265	+54	510 → 600	+90	Good (7.5/10)
4.7 V8 235hp	235 → 255	+20	393 → 415	+22	Limited (3.5/10)
4.7 V8 305hp	305 → 325	+20	453 → 475	+22	Limited (3.5/10)
5.7 Hemi V8 330hp	330 → 350	+20	500 → 520	+20	Limited (3.5/10)
5.7 Hemi V8 357hp	357 → 375	+18	527 → 545	+18	Limited (3/10)

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Displacement: 3L
Capacity: 2987 CC
Type: Car
Engine Family: Jeep 3.0L Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC16-era diesel ECU (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Jeep Commander. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeJeep

ModelCommander

Generation2006 - 2010

Engine3.0 CRD 218hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.