BHP+40 hp (44%)
Standard
90 hp
Tuned
130 hp
Torque+65 Nm (28%)
Standard
235 Nm
Tuned
300 Nm
Suitability
Excellent (8.5/10)Gains Profile
Power-focusedHeadroom
HighKia Ceed 1.6 CRDi 90hp ECU Remapping
Considering an ECU remap for your Kia Ceed 1.6 CRDi 90hp? A Stage 1 remap can take this 2010 - 2015 diesel engine from 90 BHP to 130 BHP and from 235 Nm to 300 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Ceed can achieve.
How this engine compares
- 2ndof 33 Kia Ceed engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 52%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Ceed 1.6 CRDi 90hp is a 1.6L turbocharged diesel engine producing 90 BHP and 235 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 300 Nm — a gain of around 40 BHP (44%) and 65 Nm (28%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Ceed 2010 - 2015 Engines
| Engine | BHP | Gain |
|---|