BHP+45 hp (32%)
Standard
140 hp
Tuned
185 hp
Torque+70 Nm (21%)
Standard
340 Nm
Tuned
410 Nm
Suitability
Good (7.5/10)Gains Profile
Power-focusedHeadroom
HighMAN TGE 2.0 TDI CR 140hp ECU Remapping
Considering an ECU remap for your MAN TGE 2.0 TDI CR 140hp? A Stage 1 remap can take this 2017 -> diesel engine from 140 BHP to 185 BHP and from 340 Nm to 410 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MAN TGE can achieve.
How this engine compares
- 3rdof 4 MAN TGE engines by power gain
- 71%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The MAN TGE 2.0 TDI CR 140hp is a 2.0L turbocharged diesel engine producing 140 BHP and 340 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 410 Nm — a gain of around 45 BHP (32%) and 70 Nm (21%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other TGE 2017 -> Engines
| Engine | BHP | Gain | Torque |
|---|