BHP+25 hp (24%)
Standard
105 hp
Tuned
130 hp
Torque+100 Nm (45%)
Standard
220 Nm
Tuned
320 Nm
Suitability
Excellent (8.5/10)Gains Profile
Torque-focusedHeadroom
HighMazda 2 1.5 SkyActiv-D 105hp ECU Remapping
Considering an ECU remap for your Mazda 2 1.5 SkyActiv-D 105hp? A Stage 1 remap can take this 2014 - 2018 diesel engine from 105 BHP to 130 BHP and from 220 Nm to 320 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda 2 can achieve.
How this engine compares
- 6thof 13 Mazda 2 engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 79%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mazda 2 1.5 SkyActiv-D 105hp is a 1.5L turbocharged diesel engine producing 105 BHP and 220 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 320 Nm — a gain of around 25 BHP (24%) and 100 Nm (45%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other 2 2014 - 2018 Engines
| Engine | BHP | Gain |
|---|