BHP+30 hp (19%)
Standard
155 hp
Tuned
185 hp
Torque+80 Nm (22%)
Standard
360 Nm
Tuned
440 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighMazda BT-50 2.2 TDCI 155hp ECU Remapping
Considering an ECU remap for your Mazda BT-50 2.2 TDCI 155hp? A Stage 1 remap can take this All diesel engine from 155 BHP to 185 BHP and from 360 Nm to 440 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda BT-50 can achieve.
How this engine compares
- 3rdof 3 Mazda BT-50 engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mazda BT-50 2.2 TDCI 155hp is a 2.2L turbocharged diesel engine producing 155 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 440 Nm — a gain of around 30 BHP (19%) and 80 Nm (22%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other BT-50 All Engines
| Engine | BHP | Gain | Torque |
|---|