Mercedes-Benz A 220 - 184hp Remap

The Mercedes-Benz A 220 - 184hp is a 2.0L naturally aspirated petrol engine producing 184 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 250 BHP and 400 Nm — a gain of around 66 BHP (36%) and 100 Nm (33%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.