Mercedes-Benz ML 300 CDI 190hp Remap

Name: Mercedes-Benz ML 300 CDI 190hp ECU Remap
Brand: Mercedes-Benz

Expected gains of +70 BHP and +160 Nm torque

Get Your Free Quote ↓

BHP+70 hp (37%)

Standard

190 hp

Tuned

260 hp

Torque+160 Nm (36%)

Standard

440 Nm

Tuned

600 Nm

Suitability

Excellent (8/10)

Gains Profile

Balanced

Headroom

High

Mercedes-Benz ML 300 CDI 190hp ECU Remapping

Considering an ECU remap for your Mercedes-Benz ML 300 CDI 190hp? A Stage 1 remap can take this W164 - 2009 - 2011 diesel engine from 190 BHP to 260 BHP and from 440 Nm to 600 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz ML can achieve.

How this engine compares

4thof 25 Mercedes-Benz ML engines by power gain
92%of the 9,842 engines we hold gain data for see a smaller power increase
93%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Mercedes-Benz ML 300 CDI 190hp is a 3.0L turbocharged diesel engine producing 190 BHP and 440 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 260 BHP and 600 Nm — a gain of around 70 BHP (37%) and 160 Nm (36%).

This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other ML W164 - 2009 - 2011 Engines

Engine	BHP	Gain	Torque	Gain	Score
300 CDI 204hp	204 → 260	+56	500 → 600	+100	Good (7.5/10)
350 CDI 211hp	211 → 275	+64	540 → 600	+60	Good (7.5/10)
350 CDI 224hp	224 → 275	+51	510 → 600	+90	Good (7.5/10)
350 CDI 231hp	231 → 275	+44	540 → 600	+60	Good (6.5/10)
450 CDI 306hp	306 → 350	+44	700 → 810	+110	Good (6.5/10)
63 AMG 510hp	510 → 530	+20	630 → 660	+30	Limited (3/10)

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Displacement: 3L
Capacity: 2987 CC
Type: Car
Engine Family: Mercedes-benz 3.0L CDI Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC16 / Siemens SID (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Mercedes-Benz ML. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeMercedes-Benz

ModelML

GenerationW164 - 2009 - 2011

Engine300 CDI 190hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.