BHP+18 hp (7%)
Standard
260 hp
Tuned
278 hp
Torque+23 Nm (7%)
Standard
325 Nm
Tuned
348 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowNissan Murano 3.5 V6 260hp ECU Remapping
Considering an ECU remap for your Nissan Murano 3.5 V6 260hp? A Stage 1 remap can take this 2010 -> petrol engine from 260 BHP to 278 BHP and from 325 Nm to 348 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Nissan Murano can achieve.
How this engine compares
- 2ndof 2 Nissan Murano engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Nissan Murano 3.5 V6 260hp is a 3.5L naturally aspirated petrol engine producing 260 BHP and 325 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 278 BHP and 348 Nm — a gain of around 18 BHP (7%) and 23 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Murano 2010 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|