BHP+35 hp (32%)
Standard
110 hp
Tuned
145 hp
Torque+40 Nm (16%)
Standard
250 Nm
Tuned
290 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighPeugeot 306 2.0 HDi 110hp ECU Remapping
Considering an ECU remap for your Peugeot 306 2.0 HDi 110hp? A Stage 1 remap can take this All diesel engine from 110 BHP to 145 BHP and from 250 Nm to 290 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 306 can achieve.
How this engine compares
- 1stof 3 Peugeot 306 engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 306 2.0 HDi 110hp is a 2.0L turbocharged diesel engine producing 110 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 290 Nm — a gain of around 35 BHP (32%) and 40 Nm (16%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other 306 All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 HDi 90hp | 90 → 116 | +26 |