BHP+12 hp (9%)
Standard
138 hp
Tuned
150 hp
Torque+25 Nm (13%)
Standard
190 Nm
Tuned
215 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumPeugeot 307 2.0i 16v 138hp ECU Remapping
Considering an ECU remap for your Peugeot 307 2.0i 16v 138hp? A Stage 1 remap can take this All petrol engine from 138 BHP to 150 BHP and from 190 Nm to 215 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot 307 can achieve.
How this engine compares
- 10thof 12 Peugeot 307 engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Peugeot 307 2.0i 16v 138hp is a 2.0L naturally aspirated petrol engine producing 138 BHP and 190 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 150 BHP and 215 Nm — a gain of around 12 BHP (9%) and 25 Nm (13%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 307 All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|