Peugeot Partner 1.6 BlueHDI 100hp Remap

Name: Peugeot Partner 1.6 BlueHDI 100hp ECU Remap
Brand: Peugeot

Expected gains of +30 BHP and +66 Nm torque

Get Your Free Quote ↓

BHP+30 hp (30%)

Standard

100 hp

Tuned

130 hp

Torque+66 Nm (26%)

Standard

254 Nm

Tuned

320 Nm

Suitability

Good (7.5/10)

Gains Profile

Balanced

Headroom

High

Peugeot Partner 1.6 BlueHDI 100hp ECU Remapping

Considering an ECU remap for your Peugeot Partner 1.6 BlueHDI 100hp? A Stage 1 remap can take this 2018 -> diesel engine from 100 BHP to 130 BHP and from 254 Nm to 320 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Peugeot Partner can achieve.

How this engine compares

10thof 29 Peugeot Partner engines by power gain
39%of the 9,842 engines we hold gain data for see a smaller power increase
55%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Peugeot Partner 1.6 BlueHDI 100hp is a 1.6L turbocharged diesel engine producing 100 BHP and 254 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 320 Nm — a gain of around 30 BHP (30%) and 66 Nm (26%).

This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other Partner 2018 -> Engines

Engine	BHP	Gain	Torque	Gain	Score
1.6 BlueHDI 75hp	75 → 120	+45	230 → 280	+50	Excellent (8.5/10)
1.5 BlueHDI 75hp	75 → 125	+50	230 → 320	+90	Excellent (8.5/10)
1.5 BlueHDI 100hp	100 → 140	+40	254 → 300	+46	Excellent (8/10)
1.2 Puretech 110hp	110 → 150	+40	205 → 270	+65	Excellent (8/10)
1.5 BlueHDI 130hp	130 → 160	+30	300 → 360	+60	Excellent (8/10)
1.2 Puretech 130hp	130 → 150	+20	230 → 250	+20	Good (6.5/10)

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Displacement: 1.6L
Capacity: 1560 CC
Type: Car
Engine Family: Peugeot 1.6L HDi Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC17 / Continental SID (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating.

Get Your Free Quote

Get a personalised remap quote for your Peugeot Partner. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakePeugeot

ModelPartner

Generation2018 ->

Engine1.6 BlueHDI 100hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.