Porsche Macan S 3.0 Bi-Turbo 340hp Remap

Name: Porsche Macan S 3.0 Bi-Turbo 340hp ECU Remap
Brand: Porsche

Expected gains of +60 BHP and +140 Nm torque

Get Your Free Quote ↓

BHP+60 hp (18%)

Standard

340 hp

Tuned

400 hp

Torque+140 Nm (30%)

Standard

460 Nm

Tuned

600 Nm

Suitability

Good (7/10)

Gains Profile

Torque-focused

Headroom

High

Porsche Macan S 3.0 Bi-Turbo 340hp ECU Remapping

Considering an ECU remap for your Porsche Macan S 3.0 Bi-Turbo 340hp? A Stage 1 remap can take this 2014 - 2018 petrol engine from 340 BHP to 400 BHP and from 460 Nm to 600 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Porsche Macan can achieve.

How this engine compares

6thof 15 Porsche Macan engines by power gain
86%of the 9,842 engines we hold gain data for see a smaller power increase
91%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Porsche Macan S 3.0 Bi-Turbo 340hp is a 3.0L turbocharged petrol engine producing 340 BHP and 460 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 400 BHP and 600 Nm — a gain of around 60 BHP (18%) and 140 Nm (30%).

This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other Macan 2014 - 2018 Engines

Engine	BHP	Gain	Torque	Gain	Score
S Diesel 211hp	211 → 310	+99	580 → 650	+70	Good (7.5/10)
2.0 TFSI 252hp	252 → 300	+48	370 → 440	+70	Good (6.5/10)
S Diesel 258hp	258 → 310	+52	580 → 650	+70	Good (7/10)
GTS 3.0 Bi-Turbo 360hp	360 → 400	+40	500 → 600	+100	Good (6.5/10)
3.6 Bi-Turbo 400hp	400 → 440	+40	550 → 640	+90	Good (6/10)
3.6 Bi-Turbo Performance pack 440hp	440 → 460	+20	600 → 660	+60	Moderate (5.5/10)

Technical Specifications

Fuel Type: Petrol
Aspiration: Turbocharged
Displacement: 3L
Capacity: 2997 CC
Type: Car
Engine Family: Porsche 3.0L Turbo Petrol

ECU & Transmission

Likely ECU Low confidence: Petrol ECU (varies by market/year)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Porsche Macan. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakePorsche

ModelMacan

Generation2014 - 2018

EngineS 3.0 Bi-Turbo 340hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.