Renault Master 3.0 DCi 156hp Remap

Name: Renault Master 3.0 DCi 156hp ECU Remap
Brand: Renault

Expected gains of +34 BHP and +70 Nm torque

Get Your Free Quote ↓

BHP+34 hp (22%)

Standard

156 hp

Tuned

190 hp

Torque+70 Nm (20%)

Standard

350 Nm

Tuned

420 Nm

Suitability

Good (7.5/10)

Gains Profile

Balanced

Headroom

High

Renault Master 3.0 DCi 156hp ECU Remapping

Considering an ECU remap for your Renault Master 3.0 DCi 156hp? A Stage 1 remap can take this Mk2 - 1998 - 2010 diesel engine from 156 BHP to 190 BHP and from 350 Nm to 420 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Renault Master can achieve.

How this engine compares

13thof 29 Renault Master engines by power gain
53%of the 9,842 engines we hold gain data for see a smaller power increase
55%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Renault Master 3.0 DCi 156hp is a 3.0L turbocharged diesel engine producing 156 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 420 Nm — a gain of around 34 BHP (22%) and 70 Nm (20%).

This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other Master Mk2 - 1998 - 2010 Engines

Engine	BHP	Gain	Torque	Gain	Score
1.9 DCi 82hp	82 → 105	+23	200 → 260	+60	Good (7.5/10)
2.2 DCi 90hp	90 → 115	+25	260 → 320	+60	Good (7.5/10)
2.5 DCi 100hp	100 → 135	+35	290 → 350	+60	Good (7.5/10)
2.2 DCi 114hp	114 → 145	+31	290 → 355	+65	Good (7.5/10)
2.0 DCi 120hp	120 → 160	+40	300 → 360	+60	Good (7.5/10)
2.5 DCi 125hp	125 → 150	+25	300 → 360	+60	Good (7.5/10)
3.0 DCi 136hp	136 → 165	+29	320 → 380	+60	Good (7.5/10)
2.5 DCi 150hp	150 → 180	+30	350 → 410	+60	Good (6.5/10)

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Displacement: 3L
Capacity: 2953 CC
Type: Car
Engine Family: Renault 3.0L dCi Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC15 / early generation diesel ECU (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating.

Get Your Free Quote

Get a personalised remap quote for your Renault Master. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeRenault

ModelMaster

GenerationMk2 - 1998 - 2010

Engine3.0 DCi 156hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.