Rolls Royce Wraith 6.6 V12 633hp Remap
Expected gains of +67 BHP and +155 Nm torque
Get Your Free Quote ↓BHP+67 hp (11%)
Standard
633 hp
Tuned
700 hp
Torque+155 Nm (19%)
Standard
795 Nm
Tuned
950 Nm
Suitability
Moderate (5/10)Gains Profile
Torque-focusedHeadroom
MediumRolls Royce Wraith 6.6 V12 633hp ECU Remapping
Considering an ECU remap for your Rolls Royce Wraith 6.6 V12 633hp? A Stage 1 remap can take this All petrol engine from 633 BHP to 700 BHP and from 795 Nm to 950 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Rolls Royce Wraith can achieve.
How this engine compares
- 91%of the 9,842 engines we hold gain data for see a smaller power increase
- 93%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Rolls Royce Wraith 6.6 V12 633hp is a 6.6L naturally aspirated petrol engine producing 633 BHP and 795 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 700 BHP and 950 Nm — a gain of around 67 BHP (11%) and 155 Nm (19%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.