Scania Trucks R-Series 310 Remap

Name: Scania Trucks R-Series 310 ECU Remap
Brand: Scania Trucks

Expected gains of +45 BHP and +235 Nm torque

Get Your Free Quote ↓

BHP+45 hp (15%)

Standard

310 hp

Tuned

355 hp

Torque+235 Nm (15%)

Standard

1550 Nm

Tuned

1785 Nm

Suitability

Good (6.5/10)

Gains Profile

Balanced

Headroom

Medium

Scania Trucks R-Series 310 ECU Remapping

Considering an ECU remap for your Scania Trucks R-Series 310? A Stage 1 remap can take this All diesel engine from 310 BHP to 355 BHP and from 1550 Nm to 1785 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Scania Trucks R-Series can achieve.

How this engine compares

13thof 16 Scania Trucks R-Series engines by power gain
71%of the 9,842 engines we hold gain data for see a smaller power increase
96%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Scania Trucks R-Serie 310 is a turbocharged diesel engine producing 310 BHP and 1550 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 355 BHP and 1785 Nm — a gain of around 45 BHP (15%) and 235 Nm (15%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other R-Series All Engines

Engine	BHP	Gain	Torque	Gain	Score
230	230 → 265	+35	1050 → 2110	+1060	Excellent (8/10)
270	270 → 310	+40	1250 → 1410	+160	Good (6.5/10)
340	340 → 390	+50	1700 → 1955	+255	Good (6.5/10)
380	380 → 450	+70	1900 → 2185	+285	Good (7/10)
420	420 → 500	+80	2100 → 2460	+360	Good (7/10)
440	440 → 475	+35	2300 → 2600	+300	Good (6.5/10)
450	450 → 510	+60	2350 → 2750	+400	Good (7/10)
470	470 → 560	+90	2200 → 2650	+450	Good (7/10)
480	480 → 560	+80	2250 → 2670	+420	Good (7/10)
500	500 → 595	+95	2400 → 2850	+450	Good (7/10)
520	520 → 580	+60	2700 → 3100	+400	Good (6.5/10)
560	560 → 655	+95	2700 → 3130	+430	Good (7/10)
580	580 → 670	+90	2750 → 3181	+431	Good (7/10)
620	620 → 670	+50	3000 → 3380	+380	Good (6.5/10)
730	730 → 850	+120	3600 → 4040	+440	Good (6.5/10)

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Type: Commercial
Engine Family: Scania Trucks Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC17-era diesel ECU (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Scania Trucks R-Series. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeScania Trucks

ModelR-Series

GenerationAll

Engine310

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.