BHP+30 hp (20%)
Standard
150 hp
Tuned
180 hp
Torque+85 Nm (34%)
Standard
250 Nm
Tuned
335 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighSkoda Kodiaq 1.5 TSI 150hp ECU Remapping
Considering an ECU remap for your Skoda Kodiaq 1.5 TSI 150hp? A Stage 1 remap can take this 2017 - 2020 petrol engine from 150 BHP to 180 BHP and from 250 Nm to 335 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Skoda Kodiaq can achieve.
How this engine compares
- 10thof 13 Skoda Kodiaq engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 73%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Skoda Kodiaq 1.5 TSI 150hp is a 1.5L turbocharged petrol engine producing 150 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 335 Nm — a gain of around 30 BHP (20%) and 85 Nm (34%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.