BHP+40 hp (44%)
Standard
90 hp
Tuned
130 hp
Torque+54 Nm (33%)
Standard
166 Nm
Tuned
220 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighVauxhall Adam 1.0T 90hp ECU Remapping
Considering an ECU remap for your Vauxhall Adam 1.0T 90hp? A Stage 1 remap can take this 2013 -> petrol engine from 90 BHP to 130 BHP and from 166 Nm to 220 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Vauxhall Adam can achieve.
How this engine compares
- 1stof 6 Vauxhall Adam engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 38%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Vauxhall Adam 1.0T 90hp is a 1.0L turbocharged petrol engine producing 90 BHP and 166 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 220 Nm — a gain of around 40 BHP (44%) and 54 Nm (33%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.