Vauxhall Insignia 2.0 CDTI 110hp Remap

Name: Vauxhall Insignia 2.0 CDTI 110hp ECU Remap
Brand: Vauxhall

Expected gains of +80 BHP and +140 Nm torque

Get Your Free Quote ↓

BHP+80 hp (73%)

Standard

110 hp

Tuned

190 hp

Torque+140 Nm (54%)

Standard

260 Nm

Tuned

400 Nm

Suitability

Excellent (8/10)

Gains Profile

Power-focused

Headroom

High

Vauxhall Insignia 2.0 CDTI 110hp ECU Remapping

Considering an ECU remap for your Vauxhall Insignia 2.0 CDTI 110hp? A Stage 1 remap can take this 2008 - 2013 diesel engine from 110 BHP to 190 BHP and from 260 Nm to 400 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Vauxhall Insignia can achieve.

How this engine compares

1stof 41 Vauxhall Insignia engines by power gain
95%of the 9,842 engines we hold gain data for see a smaller power increase
91%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Vauxhall Insignia 2.0 CDTI 110hp is a 2.0L turbocharged diesel engine producing 110 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 400 Nm — a gain of around 80 BHP (73%) and 140 Nm (54%).

This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other Insignia 2008 - 2013 Engines

Engine	BHP	Gain	Torque	Gain	Score
1.6i 115hp	115 → 125	+10	155 → 175	+20	Moderate (4.5/10)
1.4 Turbo 120hp	120 → 165	+45	200 → 265	+65	Excellent (8/10)
2.0 CDTi 130hp	130 → 190	+60	300 → 400	+100	Excellent (8/10)
1.8i 140hp	140 → 150	+10	175 → 190	+15	Moderate (4/10)
1.4 Turbo 140hp	140 → 165	+25	200 → 265	+65	Good (7.5/10)
2.0 CDTi 160hp	160 → 200	+40	350 → 420	+70	Good (7.5/10)
1.6 Turbo 180hp	180 → 215	+35	230 → 310	+80	Good (7.5/10)
2.0 CDTi Bi-Turbo 195hp	195 → 225	+30	400 → 480	+80	Good (6.5/10)
2.0 Turbo 220hp	220 → 295	+75	350 → 450	+100	Excellent (8/10)
2.0 Turbo 250hp	250 → 295	+45	400 → 450	+50	Good (6.5/10)
2.8 V6 Turbo 260hp	260 → 310	+50	350 → 450	+100	Good (7/10)
2.8 OPC V6 Turbo 325hp	325 → 360	+35	435 → 550	+115	Good (6.5/10)

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Displacement: 2L
Capacity: 1956 CC
Type: Car
Engine Family: Vauxhall 2.0L CDTi Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC16 / Siemens SID (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating.

Get Your Free Quote

Get a personalised remap quote for your Vauxhall Insignia. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeVauxhall

ModelInsignia

Generation2008 - 2013

Engine2.0 CDTI 110hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.