BMW 2 Series 215i (1499cc) 110hp Remap

The BMW 2 serie 215i (1499cc) 110hp is a 1.5L naturally aspirated petrol engine producing 110 BHP and 190 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 250 Nm — a gain of around 30 BHP (27%) and 60 Nm (32%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted); manuals also exist..

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.