BMW 2 Series 225xe Hybrid (1499cc) 225hp Remap

The BMW 2 serie 225xe Hybrid (1499cc) 225hp is a 1.5L naturally aspirated petrol phev engine producing 225 BHP and 385 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 275 BHP and 450 Nm — a gain of around 50 BHP (22%) and 65 Nm (17%).

This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted); manuals also exist. at this torque level, transmission and driveline servicing history becomes especially important..

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.. High tuned torque: check transmission torque capacity and service history.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.