BHP+30 hp (8%)
Standard
385 hp
Tuned
415 hp
Torque+31 Nm (6%)
Standard
549 Nm
Tuned
580 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowFord F-250 6.2 V8 385hp ECU Remapping
Considering an ECU remap for your Ford F-250 6.2 V8 385hp? A Stage 1 remap can take this -> 2020 petrol engine from 385 BHP to 415 BHP and from 549 Nm to 580 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford F-250 can achieve.
How this engine compares
- 3rdof 6 Ford F-250 engines by power gain
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 19%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford F-250 6.2 V8 385hp is a 6.2L naturally aspirated petrol engine producing 385 BHP and 549 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 415 BHP and 580 Nm — a gain of around 30 BHP (8%) and 31 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other F-250 -> 2020 Engines
| Engine |
|---|