BHP+40 hp (10%)
Standard
400 hp
Tuned
440 hp
Torque+56 Nm (5%)
Standard
1084 Nm
Tuned
1140 Nm
Suitability
Moderate (5.5/10)Gains Profile
Limited headroomHeadroom
LowFord F-250 6.7 V8 400hp ECU Remapping
Considering an ECU remap for your Ford F-250 6.7 V8 400hp? A Stage 1 remap can take this -> 2020 diesel engine from 400 BHP to 440 BHP and from 1084 Nm to 1140 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford F-250 can achieve.
How this engine compares
- 1stof 6 Ford F-250 engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford F-250 6.7 V8 400hp is a 6.7L turbocharged diesel engine producing 400 BHP and 1084 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 440 BHP and 1140 Nm — a gain of around 40 BHP (10%) and 56 Nm (5%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other F-250 -> 2020 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|