BHP+25 hp (33%)
Standard
75 hp
Tuned
100 hp
Torque+50 Nm (29%)
Standard
175 Nm
Tuned
225 Nm
Suitability
Excellent (8/10)Gains Profile
BalancedHeadroom
HighFord Focus 1.8 TDDI 75hp ECU Remapping
Considering an ECU remap for your Ford Focus 1.8 TDDI 75hp? A Stage 1 remap can take this 1998 - 2005 diesel engine from 75 BHP to 100 BHP and from 175 Nm to 225 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Focus can achieve.
How this engine compares
- 32ndof 61 Ford Focus engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Focus 1.8 TDDI 75hp is a 1.8L turbocharged diesel engine producing 75 BHP and 175 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 100 BHP and 225 Nm — a gain of around 25 BHP (33%) and 50 Nm (29%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.