Mack Econodyne AI - 12.0 - 460 466hp Remap

Name: Mack Econodyne AI - 12.0 - 460 466hp ECU Remap
Brand: Mack

Expected gains of +64 BHP and +285 Nm torque

Get Your Free Quote ↓

BHP+64 hp (14%)

Standard

466 hp

Tuned

530 hp

Torque+285 Nm (13%)

Standard

2115 Nm

Tuned

2400 Nm

Suitability

Good (6.5/10)

Gains Profile

Balanced

Headroom

Medium

Mack Econodyne AI - 12.0 - 460 466hp ECU Remapping

Considering an ECU remap for your Mack Econodyne AI - 12.0 - 460 466hp? A Stage 1 remap can take this All diesel engine from 466 BHP to 530 BHP and from 2115 Nm to 2400 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mack Econodyne can achieve.

How this engine compares

5thof 11 Mack Econodyne engines by power gain
89%of the 9,842 engines we hold gain data for see a smaller power increase
97%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Mack Econodyne AI - 12.0 - 460 466hp is a turbocharged diesel engine producing 466 BHP and 2115 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 530 BHP and 2400 Nm — a gain of around 64 BHP (14%) and 285 Nm (13%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other Econodyne All Engines

Engine	BHP	Gain	Torque	Gain	Score
AI - 300A - 12.0 305hp	305 → 360	+55	1627 → 1900	+273	Good (7/10)
AC - 350 - 12.0 352hp	352 → 418	+66	1844 → 2100	+256	Good (7/10)
AI - 350 - 12.0 355hp	355 → 420	+65	1708 → 2000	+292	Good (7/10)
AI - 375A - 12.0 381hp	381 → 440	+59	1708 → 2000	+292	Good (7/10)
AC - 400 - 12.0 405hp	405 → 480	+75	1979 → 2370	+391	Good (7/10)
AI - 400 - 12.0 405hp	405 → 470	+65	1843 → 2100	+257	Good (6.5/10)
AI - 427 - 12.0 432hp	432 → 495	+63	1979 → 2300	+321	Good (7/10)
AC - 427 - 12.0 432hp	432 → 490	+58	2115 → 2360	+245	Good (6.5/10)
AC - 460P - 12.0 466hp	466 → 520	+54	2250 → 2550	+300	Good (6.5/10)
AC - 460E - 12.0 466hp	466 → 520	+54	2250 → 2550	+300	Good (6.5/10)

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Type: Commercial
Engine Family: Mack Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC17-era diesel ECU (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Mack Econodyne. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeMack

ModelEconodyne

GenerationAll

EngineAI - 12.0 - 460 466hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.