Mack Econodyne AI - 375A - 12.0 381hp Remap

Name: Mack Econodyne AI - 375A - 12.0 381hp ECU Remap
Brand: Mack

Expected gains of +59 BHP and +292 Nm torque

Get Your Free Quote ↓

BHP+59 hp (15%)

Standard

381 hp

Tuned

440 hp

Torque+292 Nm (17%)

Standard

1708 Nm

Tuned

2000 Nm

Suitability

Good (7/10)

Gains Profile

Balanced

Headroom

Medium

Mack Econodyne AI - 375A - 12.0 381hp ECU Remapping

Considering an ECU remap for your Mack Econodyne AI - 375A - 12.0 381hp? A Stage 1 remap can take this All diesel engine from 381 BHP to 440 BHP and from 1708 Nm to 2000 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mack Econodyne can achieve.

How this engine compares

7thof 11 Mack Econodyne engines by power gain
85%of the 9,842 engines we hold gain data for see a smaller power increase
97%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Mack Econodyne AI - 375A - 12.0 381hp is a turbocharged diesel engine producing 381 BHP and 1708 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 440 BHP and 2000 Nm — a gain of around 59 BHP (15%) and 292 Nm (17%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other Econodyne All Engines

Engine	BHP	Gain	Torque	Gain	Score
AI - 300A - 12.0 305hp	305 → 360	+55	1627 → 1900	+273	Good (7/10)
AC - 350 - 12.0 352hp	352 → 418	+66	1844 → 2100	+256	Good (7/10)
AI - 350 - 12.0 355hp	355 → 420	+65	1708 → 2000	+292	Good (7/10)
AC - 400 - 12.0 405hp	405 → 480	+75	1979 → 2370	+391	Good (7/10)
AI - 400 - 12.0 405hp	405 → 470	+65	1843 → 2100	+257	Good (6.5/10)
AI - 427 - 12.0 432hp	432 → 495	+63	1979 → 2300	+321	Good (7/10)
AC - 427 - 12.0 432hp	432 → 490	+58	2115 → 2360	+245	Good (6.5/10)
AI - 12.0 - 460 466hp	466 → 530	+64	2115 → 2400	+285	Good (6.5/10)
AC - 460P - 12.0 466hp	466 → 520	+54	2250 → 2550	+300	Good (6.5/10)
AC - 460E - 12.0 466hp	466 → 520	+54	2250 → 2550	+300	Good (6.5/10)

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Type: Commercial
Engine Family: Mack Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC17-era diesel ECU (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Mack Econodyne. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeMack

ModelEconodyne

GenerationAll

EngineAI - 375A - 12.0 381hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.