Opel Insignia 2.0 CDTi 160hp Remap

Name: Opel Insignia 2.0 CDTi 160hp ECU Remap
Brand: Opel

Expected gains of +40 BHP and +70 Nm torque

Get Your Free Quote ↓

BHP+40 hp (25%)

Standard

160 hp

Tuned

200 hp

Torque+70 Nm (20%)

Standard

350 Nm

Tuned

420 Nm

Suitability

Good (7.5/10)

Gains Profile

Balanced

Headroom

High

Opel Insignia 2.0 CDTi 160hp ECU Remapping

Considering an ECU remap for your Opel Insignia 2.0 CDTi 160hp? A Stage 1 remap can take this 2008 - 2013 diesel engine from 160 BHP to 200 BHP and from 350 Nm to 420 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Insignia can achieve.

How this engine compares

13thof 41 Opel Insignia engines by power gain
63%of the 9,842 engines we hold gain data for see a smaller power increase
55%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Opel Insignia 2.0 CDTi 160hp is a 2.0L turbocharged diesel engine producing 160 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 420 Nm — a gain of around 40 BHP (25%) and 70 Nm (20%).

This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other Insignia 2008 - 2013 Engines

Engine	BHP	Gain	Torque	Gain	Score
2.0 CDTi 110hp	110 → 190	+80	260 → 400	+140	Excellent (8/10)
1.6i 115hp	115 → 125	+10	155 → 175	+20	Moderate (4.5/10)
1.4 Turbo 120hp	120 → 165	+45	200 → 265	+65	Excellent (8/10)
2.0 CDTi 130hp	130 → 190	+60	300 → 400	+100	Excellent (8/10)
1.8i 140hp	140 → 150	+10	175 → 190	+15	Moderate (4/10)
1.4 Turbo 140hp	140 → 165	+25	200 → 265	+65	Good (7.5/10)
1.6 Turbo 180hp	180 → 215	+35	230 → 310	+80	Good (7.5/10)
2.0 CDTi Bi-Turbo 195hp	195 → 225	+30	400 → 480	+80	Good (6.5/10)
2.0 Turbo 220hp	220 → 295	+60	350 → 450	+100	Excellent (8/10)
2.0 Turbo 250hp	250 → 295	+45	400 → 450	+50	Good (6.5/10)
2.8 V6 Turbo 260hp	260 → 310	+50	350 → 450	+100	Good (7/10)
2.8 OPC V6 Turbo 325hp	325 → 360	+35	435 → 550	+115	Good (6.5/10)

Technical Specifications

Fuel Type: Diesel
Aspiration: Turbocharged
Displacement: 2L
Capacity: 1956 CC
Type: Car
Engine Family: Opel 2.0L CDTi Turbo Diesel

ECU & Transmission

Likely ECU Low confidence: Bosch EDC16 / Siemens SID (varies)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating.

Get Your Free Quote

Get a personalised remap quote for your Opel Insignia. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeOpel

ModelInsignia

Generation2008 - 2013

Engine2.0 CDTi 160hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.