Opel Insignia 2.8 V6 Turbo 260hp Remap

Name: Opel Insignia 2.8 V6 Turbo 260hp ECU Remap
Brand: Opel

Expected gains of +50 BHP and +100 Nm torque

Get Your Free Quote ↓

BHP+50 hp (19%)

Standard

260 hp

Tuned

310 hp

Torque+100 Nm (29%)

Standard

350 Nm

Tuned

450 Nm

Suitability

Good (7/10)

Gains Profile

Torque-focused

Headroom

High

Opel Insignia 2.8 V6 Turbo 260hp ECU Remapping

Considering an ECU remap for your Opel Insignia 2.8 V6 Turbo 260hp? A Stage 1 remap can take this 2008 - 2013 petrol engine from 260 BHP to 310 BHP and from 350 Nm to 450 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Opel Insignia can achieve.

How this engine compares

7thof 41 Opel Insignia engines by power gain
76%of the 9,842 engines we hold gain data for see a smaller power increase
79%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Opel Insignia 2.8 V6 Turbo 260hp is a 2.8L turbocharged petrol engine producing 260 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 450 Nm — a gain of around 50 BHP (19%) and 100 Nm (29%).

This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Other Insignia 2008 - 2013 Engines

Engine	BHP	Gain	Torque	Gain	Score
2.0 CDTi 110hp	110 → 190	+80	260 → 400	+140	Excellent (8/10)
1.6i 115hp	115 → 125	+10	155 → 175	+20	Moderate (4.5/10)
1.4 Turbo 120hp	120 → 165	+45	200 → 265	+65	Excellent (8/10)
2.0 CDTi 130hp	130 → 190	+60	300 → 400	+100	Excellent (8/10)
1.8i 140hp	140 → 150	+10	175 → 190	+15	Moderate (4/10)
1.4 Turbo 140hp	140 → 165	+25	200 → 265	+65	Good (7.5/10)
2.0 CDTi 160hp	160 → 200	+40	350 → 420	+70	Good (7.5/10)
1.6 Turbo 180hp	180 → 215	+35	230 → 310	+80	Good (7.5/10)
2.0 CDTi Bi-Turbo 195hp	195 → 225	+30	400 → 480	+80	Good (6.5/10)
2.0 Turbo 220hp	220 → 295	+60	350 → 450	+100	Excellent (8/10)
2.0 Turbo 250hp	250 → 295	+45	400 → 450	+50	Good (6.5/10)
2.8 OPC V6 Turbo 325hp	325 → 360	+35	435 → 550	+115	Good (6.5/10)

Technical Specifications

Fuel Type: Petrol
Aspiration: Turbocharged
Displacement: 2.8L
Capacity: 2792 CC
Type: Car
Engine Family: Opel 2.8L V6 Turbo Petrol

ECU & Transmission

Likely ECU Low confidence: Petrol ECU (varies by market/year)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Opel Insignia. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeOpel

ModelInsignia

Generation2008 - 2013

Engine2.8 V6 Turbo 260hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.