BHP+10 hp (7%)
Standard
145 hp
Tuned
155 hp
Torque+18 Nm (10%)
Standard
185 Nm
Tuned
203 Nm
Suitability
Moderate (4/10)Gains Profile
Torque-focusedHeadroom
LowFord Focus 2.0i 16v 145hp ECU Remapping
Considering an ECU remap for your Ford Focus 2.0i 16v 145hp? A Stage 1 remap can take this 2004 - 2010 petrol engine from 145 BHP to 155 BHP and from 185 Nm to 203 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Focus can achieve.
How this engine compares
- 48thof 61 Ford Focus engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Ford Focus 2.0i 16v 145hp is a 2.0L naturally aspirated petrol engine producing 145 BHP and 185 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 203 Nm — a gain of around 10 BHP (7%) and 18 Nm (10%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Focus 2004 - 2010 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|